Name: Full Rack Colocation in NXDATA-2 Bucharest
Price: 760.38 USD
Availability: InStock

NXDATA-2 is located in a modern building less than a kilometer away from NXDATA-1 offering the second best interconnection options with over 35 networks hosted here, including main Internet Exchanges in Bucharest. NXDATA-2 is a safe location to deploy both servers and telco equipment especially when the required power draw is high.

Location

Power

Power Lines

	SETUP	MONTHLY
2 x 3-phase 16A / 400V redundant power lines – Each line is sourced from a different UPS and has its own circuit breaker that triggers when the line reaches its 16A rating. – Power lines are installed close enough to the rack cabinet to allow PDUs to be connected with their own cables. Ideally, the PDUs should have the same voltage and amperage rating as the lines. If they don't, they must be equipped with factory-installed circuit breakers. – Each power line has a single IEC60309 receptacle, allowing one PDU to be connected per line. – Ideally, equipment installed in the rack cabinet should have two power sources, each connected to a different power line to achieve power redundancy. – Equipment with only one power source should be connected in a balanced manner between the power lines and it will not be protected against failures in one power line.	-	-

Power Consumption

	SETUP	MONTHLY
3 kW maximum power provisioned by the datacenter, or 13A @ 230V. You can draw an average 2190 kWh from both lines in a month and will be charged per kWh at the end of it. (Each kWh consumed is charged separately: $0.57/kWh)	-	-
4 kW maximum power provisioned by the datacenter, or 17.4A @ 230V. You can draw an average 2920 kWh from both lines in a month and will be charged per kWh at the end of it. (Each kWh consumed is charged separately: $0.56/kWh)	-	+$197.22
5 kW maximum power provisioned by the datacenter, or 21.7A @ 230V. You can draw an average 3650 kWh from both lines in a month and will be charged per kWh at the end of it. (Each kWh consumed is charged separately: $0.55/kWh)	-	+$393.30

Connectivity

Cross Connects Patch Panel

Fiber Connectivity

	SETUP	MONTHLY
Do not install any Fiber Patch Panel – Cross Connects can still be possible to be originated or terminated in this rack cabinet by connecting it directly to your equipment.	-	-

Support

Colocation Support

SLA for Colocation

	SETUP	MONTHLY
Standard SLA for a Colocation service - 'Remote hands' This SLA assumes the equipment is installed by customer and works well, no hardware changes are expected and only occasional simple emergency requests might be required. Standard SLA includes unlimited number of requests for power cycles, visual inspection of equipment, access to a shared remote KVM along with very simple tasks for hot-plug components or cables like 'plug / unplug' or 'take .. from .. and replace .. '. The SLA does not cover installation/removal/replacement of non-hot plug components or any hardware or software troubleshooting. Requests under this SLA are executed first come, first served by 24/7 on-site datacenter personnel under the assumption they are 'urgent'. Under normal operation conditions such requests are executed in less than 30 minutes, but no guarantee is provided. . (On-site support not included in Standard SLA is charged: $57.00/Hour)	-	-
Expert SLA for a Colocation service - 'Remote Hands and Expert Installation' This SLA covers two batches of equipment physical installation in rack cabinet at a agreed date and later, packaging and shipping. Cost of packaging material, shipping and import/export duties are charged separately. It also covers expert cabling of Internet, private, management and out-of-band networks and the cost of all UTP cables and patches. It doesn't cover fiber and twinax patches that must be purchased separately. The Expert SLA includes software configuration of ILO / DRAC / IMM management ports and troubleshooting to power up the equipment. The post-install maintenance includes unlimited number of requests for power cycles, visual inspection of equipment, access to a shared remote KVM along with very simple tasks for hot-plug components or cables like 'plug / unplug' or 'take .. from .. and replace .. '. The SLA does not cover installation/removal/replacement of non-hot plug components or any troubleshooting outside the two initial installation/removal batches. Maintenance requests under this SLA are prioritized over Standard SLA and executed first come, first served by 24/7 on-site datacenter personnel under the assumption they are 'urgent'. Under normal operation conditions such requests are executed in less than 30 minutes, but no guarantee is provided. (On-site support not included in Expert SLA is charged: $57.00/Hour)	+$684.00	-
Ultimate SLA for a Colocation service - 'Everything you need' This SLA assumes the equipment must be imported, installed, removed and exported in at least 3 batches every year and equipment or cabling might need expert troubleshooting, including replacing of non hot-plug components. This is the case with companies that changes their infrastructure frequently. SLA covers unlimited batches of equipment physical installation at agreed dates in rack cabinet and at a later date packaging and shipping. Cost of packaging material, shipping and import/export duties are charged separately. It also covers expert cabling of Internet, private, management and out-of-band networks and the cost of all UTP cables and patches. It doesn't cover fiber and twinax patches that must be purchased separately. The Ultimate SLA includes software configuration of ILO / DRAC / IMM management ports and troubleshooting to power up the equipment. The post-install maintenance includes unlimited number of requests for power cycles, visual inspection of equipment, access to a shared remote KVM along with expert tasks for hardware troubleshooting and replacement using spare parts available on site. Maintenance requests under Ultimate SLA are of highest priority and executed first come, first served 24/7 by Voxility own on-site datacenter personnel. Under normal operation conditions such requests are executed in less than 30 minutes, but no guarantee is provided.	+$1140.00	+$228.00

Full Rack Colocation in NXDATA-2 Bucharest

Product Specifications

Location

Power

Power Lines

Power Consumption

Connectivity

Cross Connects Patch Panel

Fiber Connectivity

Support

Colocation Support

SLA for Colocation

Choose from available quotes linked to this account

Step 1. Page format

Step 2. Offer content

Full Rack Colocation in NXDATA-2 Bucharest

Product Specifications

Location

Power

Power Lines

Power Consumption

Connectivity

Cross Connects Patch Panel

Fiber Connectivity

Support

Colocation Support

SLA for Colocation

Add to Quote

Choose from available quotes linked to this account

Export This Offer

Step 1. Page format

Step 2. Offer content